• What city are you located in?
Toronto

Emergency Service

Book Appointment

When extensive mold growth was discovered throughout the basement of a residential property in Oakville, Ontario, professional basement mold removal was necessary to address the affected building materials and prevent further contamination. CPR24 Restoration was contacted to inspect the property and carry out a comprehensive basement mold remediation project.

During the initial inspection in September 2026, widespread visible mold contamination was documented along the lower sections of multiple basement walls, including the living area, adjoining rooms, and staircase. The affected drywall and surrounding materials showed significant signs of deterioration, raising concerns about potential concealed mold growth behind finished surfaces.

CPR24 Restoration’s remediation work involved extensive removal of mold-affected building materials and exposing the underlying wall assemblies for cleaning and assessment. The project photographs document the transformation from visibly contaminated basement walls to opened structural areas following remediation.

This real Oakville mold removal case study highlights the conditions discovered during inspection, the professional remediation approach, and the before-and-after results of addressing extensive basement mold damage.

Oakville Basement Mold Remediation – Project Overview

Project Location: Oakville, Ontario

Service Provided: Basement Mold Removal and Water Damage Remediation

Property Type: Residential Home

Initial Inspection: October 12, 2026

Remediation Documentation: October 24, 2026

Affected Areas: Basement Living Area, Staircase, Adjoining Rooms, Wall Cavities and Affected Flooring

Primary Concern: Extensive visible mold growth on basement walls and moisture-damaged building materials

Remediation Approach: Controlled removal of contaminated materials, exposure of affected wall assemblies, structural cleaning and moisture management as required.

CPR24 Restoration provides professional mold removal services in Oakville for homeowners dealing with visible mold growth, moisture damage, and suspected contamination behind walls or flooring.

Project Highlights: Oakville Basement Mold Removal

  • The Problem: Extensive visible mold growth affecting multiple basement walls, adjoining rooms, and the staircase area of a residential property in Oakville, Ontario.
  • Inspection Findings: Widespread mold-like contamination along lower drywall surfaces, with concerns about moisture-damaged materials and potential concealed mold growth.
  • Remediation Work: Extensive removal of mold-affected drywall and other impacted building materials, exposing wall cavities and structural framing for assessment and cleaning.
  • Remediation Methods: The project scope included containment barriers, HEPA air filtration, structural cleaning, Benefect antimicrobial treatment, and moisture management.
  • Documented Results: Post-remediation photographs show exposed wall framing and cleared basement areas following removal of affected materials.

Extensive Basement Mold Growth Discovered During Inspection

During the initial mold inspection at the Oakville property, CPR24 Restoration identified extensive visible mold growth affecting multiple areas of the finished basement. Significant dark mold-like contamination was documented along the lower sections of drywall in the main living area, adjoining rooms, and near the staircase.

The affected basement walls showed widespread discoloration and deterioration, with visible growth extending across several wall surfaces. These findings raised concerns about mold behind drywall, particularly within concealed wall cavities where moisture-related damage may not be immediately visible.

Due to the extent of the contamination, simply cleaning or treating the visible surfaces would not adequately address the affected porous materials. A comprehensive basement mold removal approach was required, including controlled removal of contaminated drywall, affected insulation, and other impacted building materials where necessary.

The inspection findings helped establish the scope of the basement mold remediation in Oakville, allowing the affected wall assemblies to be opened and the underlying structural materials to be assessed and cleaned.

Our Professional Basement Mold Removal Process in Oakville

Following the inspection, CPR24 Restoration developed a comprehensive basement mold remediation plan to address the widespread contamination throughout the Oakville property. Due to the extent of the visible mold growth, the project required more than basic basement mold cleaning or surface treatment.

The remediation approach focused on isolating affected areas, removing mold-contaminated building materials, exposing concealed wall cavities, and cleaning accessible structural surfaces. The scope also included HEPA filtration, antimicrobial treatment, and moisture management to address conditions associated with mold growth.

Containment and HEPA Air Filtration

The remediation scope included installing 6-mil polyethylene containment barriers to separate affected basement areas from the remainder of the home. HEPA-filtered air scrubbers and negative air pressure, where required, were specified to help control airborne dust and mold spores during demolition and cleaning.

These measures are important during professional mold remediation because disturbing contaminated drywall and other building materials can release particles into the surrounding environment.

Removal of Mold-Contaminated Drywall and Building Materials

Extensive removal of mold-affected drywall and wall finishes was necessary throughout the impacted basement areas. Unlike a standard flood cut, which typically removes a limited section of drywall, the remediation scope allowed removal to extend beyond the lower portions of the walls where visible contamination was widespread.

Affected baseboards, insulation, vapor barriers, flooring, and other porous materials were included for removal where impacted by moisture damage or mold contamination.

Opening the affected wall assemblies provided access to previously concealed areas and allowed the underlying framing and structural materials to be assessed. The post-remediation photographs show substantial sections of drywall removed, with exposed wall studs and cleared basement areas.

For homeowners experiencing similar problems, professional basement mold removal services can help address contaminated drywall, concealed wall cavities, and moisture-related mold growth.

HEPA Vacuuming and Structural Surface Cleaning

Following the removal of contaminated materials, the remediation scope included detailed HEPA vacuuming of exposed framing, wall cavities, flooring surfaces, and other accessible structural areas.

Mechanical cleaning was also specified for affected structural materials where appropriate. This process is intended to remove remaining visible contamination and accumulated debris from surfaces that can be effectively cleaned.

Antimicrobial Treatment and Moisture Management

The remediation plan included applying Benefect antimicrobial treatment to affected structural surfaces following physical cleaning.

Commercial dehumidifiers and air movers were also specified where required based on site conditions and moisture readings. Moisture monitoring helps determine whether accessible building materials require additional drying and whether conditions remain favourable for future mold growth.

By combining controlled material removal, structural cleaning, and moisture management, the project addressed the extensive basement mold contamination documented during the initial assessment.

Basement Mold Remediation Results: Before and After

The basement mold removal project in Oakville resulted in a significant change to the affected areas of the property. The initial inspection documented widespread visible mold growth along multiple basement walls, while the post-remediation photographs show extensive removal of contaminated wall finishes and exposed structural framing throughout the affected areas.

Before Remediation: Extensive Mold Contamination

Before the remediation work, several sections of the finished basement showed substantial dark mold-like growth, particularly along the lower portions of the drywall. Visible contamination extended across walls in the main living area, adjoining rooms, and near the staircase.

The extent of the damage demonstrated why surface-level basement mold treatment would not have been sufficient. Mold-affected porous materials required removal to allow access to concealed areas and address contamination beyond the visible wall surfaces.

After Remediation: Contaminated Materials Removed

Following the removal of affected building materials, the basement presented a substantially different condition. The post-remediation photographs show exposed wall studs, opened wall cavities, and cleared floor areas where contaminated finishes had previously been present.

Removing the affected drywall and other impacted materials allowed access to underlying structural surfaces and previously concealed sections of the basement.

The documented results demonstrate the importance of a thorough basement mold remediation process, particularly when mold growth extends across multiple rooms and affects porous building materials.

Addressing Extensive Basement Mold Damage

This Oakville project highlights why professional mold removal often requires more than applying a cleaning solution to visible mold. Proper remediation involves assessing the extent of contamination, removing materials that cannot be effectively cleaned, and addressing moisture-related conditions that contribute to mold growth.

For homeowners experiencing similar issues, early identification of moisture problems and professional assessment can help determine the appropriate scope of mold removal from basement walls and other affected building materials.

Why Professional Basement Mold Removal Is Important for Oakville Homeowners

Basement mold can become a serious property concern when moisture accumulates behind drywall, beneath flooring, or inside concealed wall cavities. In Oakville homes, basement moisture problems may develop from foundation leaks, plumbing failures, flooding, condensation, or elevated humidity. When damp conditions persist, mold can grow on porous building materials such as drywall, wood, and insulation.

This Oakville home project demonstrated how extensive mold contamination can affect multiple areas of a finished basement. Visible growth was documented along several walls, highlighting the importance of identifying the full extent of contamination rather than treating only the affected surfaces.

Why Mold Behind Basement Drywall Requires Attention

Mold growing behind drywall can remain hidden until staining, discoloration, or deterioration becomes visible. Because drywall is porous, extensive mold contamination may require removal of affected sections rather than surface cleaning alone.

Professional basement mold removal involves evaluating the affected materials, identifying potential concealed contamination, and determining which surfaces can be cleaned and which materials require removal.

Homeowners who notice recurring mold growth, musty odours, or unexplained moisture damage can arrange a professional mold inspection in Oakville to help identify affected areas and determine whether remediation is necessary.

Why Controlling Moisture Is Essential After Mold Remediation

Effective basement mold remediation involves more than removing visible contamination. The moisture conditions contributing to mold growth must also be identified and addressed to reduce the likelihood of recurrence.

Depending on the property, moisture problems may involve water intrusion through foundation walls, plumbing leaks, inadequate ventilation, or persistent basement humidity. Professional moisture assessments can help determine whether additional drying or moisture-control measures are necessary.

For homeowners dealing with extensive basement mold, addressing both contaminated building materials and the underlying moisture problem is an important part of protecting the property from future damage.

When Should Homeowners Consider Professional Mold Removal?

Professional mold removal services should be considered when mold growth is widespread, repeatedly returns after cleaning, affects porous building materials, or may extend behind walls and beneath flooring.

Large areas of contamination can require specialized containment, controlled demolition, HEPA filtration, and detailed structural cleaning to help prevent contaminated dust from spreading into unaffected spaces.

As demonstrated by this Oakville basement mold removal case study, extensive mold damage may require opening affected wall assemblies and removing contaminated materials to properly assess and address the problem.

Frequently Asked Questions About Basement Mold Removal in Oakville

How much does basement mold removal cost in Oakville?

The cost of basement mold removal in Oakville depends on the extent of contamination, affected square footage, accessibility, and materials requiring removal. Small, localized mold problems generally cost less than extensive basement remediation involving multiple rooms, drywall removal, containment, HEPA filtration, and structural cleaning. CPR24 Restoration offers professional on-site inspections for $250 + HST, with the inspection fee credited toward remediation services if the project proceeds.

Can mold be removed from basement walls without removing drywall?

Small areas of surface mold on certain non-porous materials may be cleaned, but extensively contaminated drywall often requires removal. Because drywall is porous, mold can penetrate the material and develop behind finished surfaces. Professional mold removal from basement walls may involve removing affected drywall, inspecting concealed wall cavities, and cleaning exposed structural materials.

How long does basement mold remediation take?

The duration of basement mold remediation depends on the size of the affected area, severity of contamination, demolition requirements, and moisture conditions. Smaller projects may take one to two days for initial remediation, while extensive basement mold removal can require additional time for controlled demolition, structural cleaning, drying, and equipment monitoring. The final timeline is determined following an on-site assessment.

What causes mold to grow on basement walls?

Mold on basement walls commonly develops when moisture is present for prolonged periods. Potential causes include foundation leaks, plumbing failures, basement flooding, condensation, and elevated humidity. Mold can grow on drywall, wood, insulation, and other susceptible materials when moisture conditions remain favourable. Identifying and correcting the moisture source is essential to reducing the likelihood of recurring mold growth.

Is HEPA vacuuming enough to remove mold from a basement?

HEPA vacuuming is an important component of professional basement mold treatment, but it is not always sufficient on its own. Extensive contamination affecting porous materials may require controlled removal of drywall or insulation, physical cleaning of exposed structural surfaces, and appropriate containment. HEPA filtration helps control airborne particles during the remediation process, while moisture management addresses conditions that contribute to mold growth.

When should homeowners schedule a professional basement mold inspection?

Homeowners should consider a professional inspection when they notice widespread mold growth, persistent musty odours, recurring moisture problems, water-damaged drywall, or suspected mold behind walls. A professional assessment can help determine the extent of visible damage and whether additional investigation or remediation is necessary.

CPR24 Restoration provides mold removal services in Oakville for residential properties affected by basement mold, moisture damage, and contaminated building materials.

Need Professional Basement Mold Removal in Oakville? Contact CPR24 Restoration

If you’ve discovered mold on your basement walls, noticed persistent musty odours, or suspect hidden moisture damage behind drywall, CPR24 Restoration provides professional basement mold removal and mold remediation services in Oakville, Ontario.

Our experienced restoration team handles extensive basement mold contamination, water-damaged building materials, concealed mold growth, and moisture-related property damage. Using professional containment methods, HEPA filtration, controlled removal of affected materials, and detailed structural cleaning, CPR24 Restoration develops remediation plans based on each property’s conditions.

Whether you’re dealing with localized mold growth or widespread contamination throughout a finished basement, a professional inspection can help determine the appropriate next steps.

CPR24 Restoration offers mold inspections for $250 + HST, including a visual assessment, moisture evaluation, and written findings. The inspection fee is credited toward the remediation cost when you proceed with our services.

Learn more about our professional mold removal services in Oakville or contact CPR24 Restoration to schedule an on-site assessment.

Call CPR24 Restoration: (416) 551-8287

24/7 Emergency Restoration Services | Oakville & Greater Toronto Area

Website: https://cpr24restoration.ca/

Restoration Services That We Offer

How It Works

From water damage restoration to mold removal, get the restoration services you need from the leading IICRC-Certified experts at CPR24 Restoration.

Enter Details

Please provide as much information as possible about your emergency service and answer a few questions. Within minutes, we will be able to provide you with an expert. It’s easy and quick!

Book Assessment

One of our experts will come to your home or business and perform a thorough inspection. We will be ready to provide you with professional advice and a quote right away!
Schedule Appointment

Hire Us

We are the best restoration company in the GTA. We are continually working to improve our processes and remain updated on new techniques and methodologies.

What should I do immediately after water damage or flooding?

If your home experiences water damage or flooding, stop the water source if it is safe to do so and avoid areas with potential electrical hazards. Move valuable belongings away from the affected area when safe, take photographs for insurance purposes, and contact a professional water damage restoration company as soon as possible. Avoid entering sewage-contaminated water or using household vacuums to extract standing water. CPR24 Restoration provides 24/7 emergency water damage services, including water extraction, moisture assessments, structural drying, and cleanup.

How much does professional water damage restoration cost?

The cost of water damage restoration depends on the size of the affected area, water contamination category, severity of damage, and materials requiring drying or removal. Smaller, localized water losses generally cost less than extensive basement flooding, sewage backups, or multi-room water damage. Pricing may include emergency water extraction, air movers, commercial dehumidifiers, antimicrobial cleaning, equipment monitoring, and demolition. CPR24 Restoration prepares detailed estimates based on the property’s condition, with reconstruction and finishing work generally quoted separately.

How long does it take to dry out water damage?

Professional structural drying commonly takes approximately 3–5 days, although smaller losses may dry sooner and extensive damage can require additional time. Drying duration depends on the amount of water, affected materials, humidity, temperature, and how deeply moisture has penetrated walls and flooring. CPR24 Restoration uses commercial dehumidifiers, air movers, moisture meters, and drying equipment to support and monitor the process. Equipment remains in place as needed until the affected materials reach appropriate drying goals.

Does homeowners insurance cover water damage restoration?

Homeowners insurance often covers sudden and accidental water damage, such as certain burst pipes, plumbing failures, or appliance leaks, depending on the policy. Sewer backups and overland flooding may require additional coverage, while gradual leaks and maintenance-related damage are commonly excluded. CPR24 Restoration works with insurance companies and provides photographs, moisture readings, detailed restoration estimates, and supporting documentation to assist with the claims process. Coverage, deductibles, and payment approvals are determined by the insurance provider and the homeowner’s policy.

What is included in professional water damage restoration?

Professional water damage restoration typically includes an initial damage assessment, moisture detection, standing water extraction, removal of unsalvageable materials, structural drying, cleaning, and ongoing moisture monitoring. CPR24 Restoration follows IICRC S500 water damage restoration practices and uses commercial air movers, dehumidifiers, moisture meters, and thermal imaging equipment to assess and dry affected areas. HEPA air filtration and appropriate antimicrobial treatments may also be used when conditions require them. The restoration plan depends on the water source, contamination level, and affected building materials.

Can water damage cause mold, and how quickly can it grow?

Yes. Mold can begin developing within approximately 24–48 hours under favourable moisture conditions, especially when drywall, insulation, carpeting, or other porous materials remain damp. However, visible mold does not necessarily appear within that timeframe. Prompt water extraction, professional structural drying, and moisture monitoring help reduce the risk of mold growth after flooding or leaks. CPR24 Restoration uses moisture detection equipment, air movers, and commercial dehumidifiers to address excess moisture. Existing mold contamination may require separate professional remediation.

Can water-damaged drywall and flooring be saved, or do they need to be replaced?

Some water-damaged drywall and flooring can be dried and restored, depending on the water source, contamination level, exposure duration, and material condition. Clean-water damage may allow certain materials to be salvaged, while sewage-contaminated drywall, insulation, carpeting, and other porous materials often require removal. Hardwood, laminate, vinyl, and subflooring assemblies may also trap moisture beneath their surfaces. CPR24 Restoration evaluates moisture levels and material conditions to determine whether professional drying is appropriate or controlled removal and replacement are necessary.

How do I know if there is hidden water damage behind walls or under floors?

Signs of hidden water damage include musty odours, bubbling paint, discoloured drywall, warped flooring, swollen baseboards, and unexplained dampness. Water can travel behind walls, beneath flooring, and into insulation or structural cavities without leaving obvious surface damage. CPR24 Restoration uses moisture meters, thermal imaging, and visual inspections to identify suspicious moisture conditions and assess affected materials. Thermal imaging can indicate temperature differences associated with potential moisture but does not directly measure water content. Additional investigation may be required to confirm concealed damage.

Is it safe to stay in a house after flooding or sewage backup?

Whether a property is safe to occupy after flooding depends on the water source, contamination level, electrical hazards, and extent of damage. Clean-water incidents may allow occupants to remain in unaffected areas, while sewage backups, heavily contaminated floodwater, or extensive structural damage may require restricted access or temporary relocation. Sewage-contaminated water can contain harmful microorganisms and should not be handled without appropriate precautions. CPR24 Restoration provides professional sewage cleanup, contaminated-material removal, cleaning, and drying services based on the property’s conditions.

Does water damage restoration include drywall repairs, flooring, and reconstruction?

Water damage restoration generally begins with emergency mitigation, including water extraction, removal of damaged materials, cleaning, and structural drying. Once the affected areas have reached appropriate drying goals, reconstruction can begin. CPR24 Restoration also provides repair and reconstruction services, including drywall replacement, taping, sanding, painting, flooring installation, baseboards, and other necessary finishing work. Emergency water damage mitigation and reconstruction are typically estimated separately, allowing the final repair scope to reflect the damage identified during cleanup and drying.

Best Regards,
Where are CPR24 Restoration’s offices, and which areas do you serve for water damage restoration?

CPR24 Restoration has office locations in North York, Richmond Hill, Vaughan, Aurora, Etobicoke, Mississauga, and Oakville. Our team provides on-site water damage restoration across Toronto and surrounding communities, including Scarborough, Woodbridge, Maple, Markham, Stouffville, Newmarket, King City, Bradford, Bolton, Caledon, Brampton, Burlington, Milton, Pickering, Ajax, Whitby, Oshawa, and Uxbridge. Services include emergency water extraction, flooded basement cleanup, sewage backup cleanup, structural drying, and water damage repairs. Call 416-551-8287 for 24/7 emergency assistance and to confirm availability at your property.

How much does professional mold removal cost?

Professional mold removal typically costs between $1,800 and $3,800 for smaller, contained areas, while larger or more extensive remediation projects may range from $4,000 to $10,000 or more. The final cost depends on the size of the affected area, severity of contamination, accessibility, and whether damaged materials require removal. Pricing may include containment, HEPA air filtration, antimicrobial treatment, and disposal. CPR24 Restoration provides professional mold inspections and detailed remediation estimates. Drywall replacement, painting, and reconstruction are generally quoted separately.  

Can I remove mold myself, or should I hire a professional?

Small patches of mold on accessible, washable surfaces can sometimes be cleaned safely with appropriate protective equipment. However, professional mold removal is recommended for extensive contamination, recurring mold growth, sewage-related contamination, or mold affecting drywall, insulation, and concealed areas. Improper removal can spread mold particles and leave contamination behind. CPR24 Restoration follows IICRC S520 remediation practices, using containment barriers, HEPA air filtration, and professional cleaning procedures to help prevent contamination from spreading.

Is black mold dangerous to your health?

Black mold refers to mold with a dark appearance and does not necessarily identify a particular species. Exposure to indoor mold can cause allergic reactions, respiratory irritation, and worsening asthma symptoms in susceptible individuals. Mold colour alone cannot determine its health risks. Any visible indoor mold should be investigated, especially when it covers a large area or repeatedly returns. Professional mold remediation may be recommended depending on the extent of contamination and affected building materials.

How do I know if I have hidden mold behind walls or ceilings?

Common signs of hidden mold include persistent musty odours, water stains, peeling paint, warped baseboards, damp drywall, and previous water damage. Mold can develop behind walls, beneath flooring, above ceilings, and inside concealed cavities where moisture remains trapped. CPR24 Restoration uses moisture meters, thermal imaging, and visual inspections to identify suspicious moisture conditions. These tools help locate potential moisture problems but do not directly confirm mold growth. Additional investigation or selective removal of building materials may be necessary to identify concealed contamination.

How long does professional mold remediation take?

Professional mold remediation typically takes one to several days, depending on the size of the affected area, contamination levels, and materials requiring removal or treatment. Smaller projects may be completed within one day, while larger projects may require additional time for containment, demolition, cleaning, drying, and verification. HEPA air scrubbers may remain operating after active remediation when appropriate. Drywall replacement, painting, and other reconstruction work are generally scheduled separately

What is included in professional mold remediation?

Professional mold remediation typically includes assessing the affected area, installing 6-mil polyethylene containment barriers when required, using HEPA-filtered air scrubbers and negative air pressure where appropriate, removing contaminated materials, HEPA vacuuming, and detailed surface cleaning. CPR24 Restoration follows IICRC S520 practices and uses Benefect antimicrobial treatment when suitable. Moisture assessments, dehumidifiers, and additional drying equipment may also be required. The exact scope depends on the extent of contamination, affected building materials, and property conditions.

Does moldy drywall need to be removed, or can it be cleaned?

Mold-contaminated drywall often requires removal because drywall is a porous material that can absorb moisture and support mold growth beneath its surface. Surface cleaning or antimicrobial spraying alone may not adequately address contamination within the material. When mold affects drywall, insulation, or concealed wall cavities, professional remediation may involve controlled demolition, HEPA vacuuming, detailed cleaning, and appropriate antimicrobial treatment. CPR24 Restoration evaluates affected materials to determine whether cleaning is sufficient or selective removal is necessary. Drywall replacement and reconstruction are quoted separately.

Can mold come back after professional removal?

Yes, mold can return after professional remediation if the underlying moisture problem has not been corrected. Common causes include plumbing leaks, roof damage, condensation, high humidity, and inadequate ventilation. Professional mold remediation removes or cleans contaminated materials, but preventing future growth also requires moisture control. Repairing leaks, improving ventilation, maintaining appropriate indoor humidity, and promptly drying water-damaged materials can significantly reduce the likelihood of mold returning.

Do I need a mold inspection or air quality test before mold removal?

A professional mold inspection is recommended when the extent, location, or cause of contamination is unclear. However, air quality testing is not always necessary when visible mold is already present. Testing may be useful when there are persistent musty odours without visible growth, concerns about hidden contamination, or a need for independent post-remediation verification. CPR24 Restoration offers mold inspections, moisture assessments, and air quality testing to help evaluate property conditions and determine appropriate remediation recommendations.

Does homeowners insurance cover mold removal?

Homeowners insurance may cover mold remediation when the contamination results from a sudden and accidental water damage event covered by the policy. Mold caused by long-term leaks, excessive humidity, condensation, or inadequate maintenance is often excluded. Coverage depends on the insurance provider, policy wording, and cause of damage. CPR24 Restoration assists homeowners with inspection reports, photographs, remediation estimates, and supporting documentation for insurance claims. Homeowners should confirm their specific coverage with their insurance provider.

Where is CPR24 Restoration based, and which areas do you serve for mold removal?

CPR24 Restoration has office locations in North York, Richmond Hill, Vaughan, Aurora, Etobicoke, Mississauga, and Oakville. Our team provides on-site mold inspections and professional mold removal across Toronto and the GTA, including Scarborough, Woodbridge, Maple, Markham, Stouffville, Newmarket, King City, Bradford, Bolton, Caledon, Brampton, Burlington, Milton, Pickering, Ajax, Whitby, Oshawa, and Uxbridge. Services include attic, basement, bathroom, and other residential and commercial mold remediation. Call 416-551-8287 to confirm availability and arrange an assessment at your property.

Can't find an answer?

Contact Us Today

Schedule Appointment

Frequently Asked Questions

Why Choose Us

Appointments

You can schedule appointments whenever you want! You can obtain an estimate for your emergency service at any time. We always have experts on call in your area or close by.

Fast Service

When disaster strikes, you need help right away. We offer a 24-hour fast Emergency Service, specializing in water damage, flood damage repair, mold remediation, and removal services.

Experience

CPR24 Restoration has been providing exceptional service and first-class professional disaster recovery for your home or business as a restoration company. Our project managers will help with the restoration by ensuring that the customers’ vision is achieved.

Certified Mold Removal & Remediation Company

CPR24 Restoration is an IICRC-certified mold removal and remediation company that provides you with fast and thorough commercial and residential mold removal services. Our main goal is to fully restore your property back to its previous situation in a short period of time.

Workmanship

We are passionate about meeting the needs of all our customers. We offer water damage, mold remediation, and other restoration services to minimize your downtime and get you back on track with your life.

Approved Pricing

CPR24 Restoration is an emergency restoration company with 24 hour response time. Licensed, insured, and provides the competitive pricing and reliable service you need when disaster strikes.

Contact Us Now

Request a Quote

What Our Clients Are Saying

 
 
 
 
 
 
 
  
 
 
 Google 
 Marilyn Lowe profile picture 
 
 
 Marilyn Lowe 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
We consider ourselves fortunate to have happened upon CPR24 Restoration via a Google search when we were in need of remediation work for a mold issue in our basement. The glowing reviews prompted us to call and we quickly became aware of why this company has met with so much success.  As soon as Chris arrived we could see his mind turn to problem-solving mode.  He assessed our situation, outlined the work that needed to be done and most importantly provided reassurances that his team could get right on it.  It gave us peace of mind to know that CPR24 could not only deal with the mold issue but also put everything back together and refresh all the areas involved.  Not having to go in search of renovation contractors was particularly important to us as we had time constraints to get the work done.  We were impressed by the efficiency of the trades and the respect shown to us and our home by all the workers involved.  And it was nice to see some of the same faces throughout the project which provided continuity for us.  It was evident that these individuals took pride in their work and were committed to a job well done. We thank CPR24 for its professionalism and timely service and certainly recommend it for your restoration needs.
  
 
  
 
 
 Google 
 Mario Cani profile picture 
 
 
 Mario Cani 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
I had a flood in my basement and I called right away to get help. The team was extremely professional and efficient. They were with me every step of the way, and answered all the questions that I had. This is by far one of the most professional companies I have ever had the pleasure of dealing with. I would recommend them to everyone that I know because they really care about their work and they treat the customer with the upmost importance and respect
  
 
  
 
 
 Google 
 Automotive service profile picture 
 
 
 Automotive service 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
Outstanding service from CPR Restoration! They were fast, professional, and took care of everything with great attention to detail. Highly recommend for any restoration needs.
  
 
  
 
 
 Google 
 siobhan freedman profile picture 
 
 
 siobhan freedman 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
Recently found mold in my attic, called CPR24 Restoration after finding them on the first page of Google. They picked up the phone straight away and gave me a whole detailed rundown on the steps that would need to be taken in my attic. They were very professional and efficient throughout the entire process.

Overall excellent mold removal and remediation company with quick and professional service. Beyond satisfied with the results! Will be recommending to my friends&family.
  
 
  
 
 
 Google 
 Ryan McCahill profile picture 
 
 
 Ryan McCahill 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
I called CPR24 Restoration after a condo water leak I recently experienced. After searching flood companies on Google and countless calls with other companies, CPR24 Restoration was the one that stood out to me most and was honestly most helpful throughout the entire process. Chris was quick to answer the phone, and they were the only company that gave me a clear outline of the water damage and flooding process. He met with me the same day of my phone call and was always very punctual. The team was very patient with me, they helped answer all of my many questions and were always very quick to respond if I had any issues throughout the week. I really appreciated how supportive Chris and his team were throughout the entire process. Highly recommend CPR24 Restoration!
  
 
  
 
 
 Google 
 Aiden Lenehan profile picture 
 
 
 Aiden Lenehan 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
I had an amazing experience with CPR24 Restoration. I had mold in my basement and they were very quick and easy. Great customer service, Highly recommend.
  
 
  
 
 
 Google 
 Stacey Ndoci profile picture 
 
 
 Stacey Ndoci 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
My sister recommended CPR24 Restoration for flood damage and mold removal. I started to smell mold in my basement last week, I called Chris and he was there within the hour. I am so relieved I called him when I did because there were signs of toxic black mold which their team removed very efficiently. Staff was friendly and very punctual. Overall 10/10 experience!
  
 
  
 
 
 Google 
 Farid Amir profile picture 
 
 
 Farid Amir 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
Recently I had mold problem in my basement Chris from CPR Restoration came with his professional team and took care of the situation I recommended them to all my friends great company to call
  
 
  
 
 
 Google 
 Tatiana Trigazis profile picture 
 
 
 Tatiana Trigazis 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
I want to share my wonderful experience with CPR24 Restoration whom I highly recommend to others looking for mold removal companies.

I called CPR24 Restoration for the toxic black mold I had in my basement, after finding them on Google.

They were always on time, responded quick to my emails, and made me feel very secure throughout the whole process.

Their team was very efficient but extremely careful at the same time. So professional and will definitely be keeping their contact for the future.
  
 
  
 
 
 Google 
 Progna Paramita profile picture 
 
 
 Progna Paramita 
 
 
 
 Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google. 
I was so stressed out though, but Chris and his team are well organised, skilled, well mannered and very friendly. Anytime I called him, he replied. His main focus on client’s satisfaction. He is a very sincere person. Thanks very much to CPR24.
Read All Reviews
Scroll to Top

Water Damage, flooding, or mold issues, our expert team is available 24/7 to restore your property. Contact Us Now!

What city are you located in?
Book Appointment
Call Now