wet timber drying

Wet Timber Drying Benefits

Timber floors are a good idea for most of the rooms. They look great and insulate heat from the floor quite well, but they also have their downsides. The floor with the time gets moisture and sometimes it happens to occur water damage due to floods or system damages. Wet timber drying is necessary with the time!

When the floor gets moisture, the entire area needs to be disinfected. The presence of water can activate a lot of germs, mould, and bacteria which if left untreated can turn into a risk for your health. It is important that you take extra care whenever you’re dealing with water damage throughout your home as it is one of the most time-sensitive emergencies that you can get.

In the case of moisture accumulation, we suggest you call professionals. Cpr24Restoration is a professional company that deals with such problems. By booking a wet timber drying service you will prevent many malicious after comings. Here we are listing a few reasons why to call a professional for wet timber drying.

Wet Timber Drying Prevents Mold.

  • Excess water that sits on wood floors for a long period of time may cause the floors to become warped or create white cloudy stains/spots and discoloration of the topcoat polyurethane. Fast Wet timber drying is essential to prevent possible damages to your floors, once any excess water is cleaned up, a DRYER should be placed on the floor to dry the timber planks.
  • Issues related to mould and mildew are gaining increased attention from both residential and commercial property owners as well as the public at large. There is a huge reason for this, for sure! In all possible situations, if there is a mould issue, there is an excessive moisture issue. In order to control, prevent, or eradicate mould and mildew, one must first identify, evaluate, and eliminate the source of excessive moisture.
  • Once the source of the moisture is found and fixed, the laminate floor wet timber drying processes should start immediately. Water removal tasks usually include mopping or using a wet-dry vacuum, depending on the amount of water. Wood floors pose special problems for extraction as water becomes trapped under and between the planks. This problem is compounded by the existence of wood sub-floors.
  • Water mainly penetrates under the boards of the floor from the gaps next to walls and floorboards joint section and traps between foam underlay and floor. An expansion gap is an important and necessary part of any successful installation because it allows space for the expansion of the floor as it responds to these external influences of temperature and humidity.
  • If you prefer to wet timber drying by yourself, make sure to allow the wood to dry equally and gradually. DO NOT use heaters to dry wood floors as the heat will cause sudden focused drying and you will cause permanent damage to the heated area. Air circulation is a good wet timber drying manner. Let your windows and doors of the damaged room open to allow air to flow. You can fasten the process by using fans to promote better air circulation.
  • Some water damages on the timber floorboards may be difficult to find or it may even develop later, if water damaged timber floor is not completely dry and sanitized, more likely mould begins to grow within a few weeks. You need special equipment to measure moisture content and professional help is possibly your best route especially where you have doubts.

Wet timber drying prevents Stains and Odor.

  • Once the wood has been soaked by water, timber may develop discoloration or failure of the topcoat polyurethane or stains on the wooden surface. White stains or haze typically indicates minimal damage to the surface of the timber floor.
  • Depending on what caused the flood damage and the time of reaction, wet timber floorboards develop eventually an unpleasant odor.  A black stain can indicate bigger issues, such as mould growth. Wood is especially more exposed to mould growth, so you need to ensure that the floor and sub-floor are well dried.

It prevents wood swelling, warping, and decay.

  • Wood flooring has a great potential to swell and buckle when it becomes wet and cannot be dried out rapidly or adequately. Wooden floors need to be dried gradually and equally, you need to get the moisture out at the right rate. You do it too fast, and there is the possibility of the risk of splitting wood. You do it too slow, and you run the risk of cupping warping, etc.
  • Warping or buckling is almost always as a result of moisture or water damage. High moisture content in the air can sometimes lead to buckling or warping. Excessive water on the surface of the floor can also lead to buckling or warping.
  • High moisture content in the air can also lead to buckling or warping. Excessive water on the surface of the floor can also lead to buckling or warping. For this reason, it is important never to wet mop a laminate floor. The most common cause of buckling or edge-warping is water or dampness rising from the subfloor in conjunction with the lack of a sufficient moisture barrier.
  • The laminate timber flooring is typically resistant to water damage, but standing water and a large amount of moisture that gets under the floor (as the water has no place to evaporate) can eventually destroy the floor and decay the product. The laminate flooring wet timber drying eliminates the chance of wood decay.
  • The core (middle section) of a laminate floor plank is made from HDF. Most laminate cores however are treated with water repellent chemicals. If your flooring core is water damaged, your only remedy is to replace the affected boards.


CPR24 Restoration is a full-service mould remediation company. What it means is that we offer the full scale of solutions needed for complete removal and prevention of mould. From identifying the cause of mould to fixing any design flaws or tubing associated with it to repairing or replacing the affected areas, and the prevention of further mould by removal and sealing to rigorous testing to detect any traces of new mould, we strive to be a leader in the mould solutions industry.

By following our team tips, you easily will remove mould in areas such as bathroom walls and floors, however, if you have a significant mould issue, please call CPR24 Restoration.